10% off all products for online orders. Price reflected in cart. (excluding presses)

For Accurate Uniform Handloads, Since 1927

0Item(s)
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Case Trimmer Parts

Set Descending Direction

   

12 Item(s)

  1. 50 Cal TiN Coated Cutter

    NEW! 

    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
    $63.00
  2. L.E. Wilson Case Trimmer Stand

    An alternative to mounting the trimmer in a vise. The Trimmer stand is available in the Regular and the 50 caliber verisons. Can be clamped or mounted to bench with screws. Anodized flat black for a long lasting finish. Sinclair "Shark Fin" compatable Comes with two screws to mount trimmer to stand. Bench mounting screws not provided.

    INSTRUCTIONS

  3. Regular TiN Coated Cutter

    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
  4. Replacement Case Trimmer Cutter

    We have two different cutters sizes available for the regular case trimmer, one for .17 caliber and one for .22 - .45. The trimmer cutter is designed to trim cases to length and has been perfected over the last 70+ years to give you a flat square cut with little effort. Hardened to 60 Rockwell.

    17 Caliber Cutter = .17 cal cases (will also trim up to .45)
    Trimmer Cutter = Cases up to .490 (.22 - .45)

    Note: To be used with the Stainless Steel Case Trimmer and Stainless Micrometer Case Trimmer, Power Adaptor compatible

    50 Caliber = Cases .490 - .605 (.50)

    Note: To be used with the 50 Caliber Case Trimmer, Power Adaptor compatible

  5. Stainless Steel Revolving Crank Handle

    Upgrade your Case Trimmer Handle with the NEW Stainless Steel revolving crank. 

    • Extremely smooth action and improved ergonomics.
    • 304 Grade High Strength Stainless Steel
    • Revolving Stainless Steel Handle
    • Hole for Handle is Tapped in Crank for Easy Removal or Insertion, blind tapped on the cutter hole for a smooth outside finish (see picture)
    • Solid cavity free construction
    • Will work with standard cutter, 50 caliber cutter, NEW titanium nitride cutters, 30 and 45 degree Uniform De-burring tool, 50 cal Primer Pocket, 50 Cal Inside Neck Reamer

     

    $28.00
  6. Trimmer Power Adapter

    Add power to your trimming with the power adapter. Designed to be used with a slow low powered hand drill.

    7/16-20 TPI - Will fit all of L.E. Wilson Brand Cutters. Including 50 Cal and TiN cutters.

    **NOTE - Operate between 100 - 200 RPM, higher speeds can cause cutter to seize in cutter bearing. **
    Keep cutter oiled when trimming

    $28.00
  7. Trimmer Base Rods

    Replacement rods for the trimmer base. These are the rails that the trimmer bearing and stop assembly rest on.
  8. Stainless Trimmer Stop Assembly

    Standard Stop Assembly Replacement. Includes Stop Screw, Stop Nut, Set Screw, Pad and Mounting Screw.
    Stop Screw is coated in black oxide coating for long durable finish

  9. Stainless Trimmer Cutter Bearing

    Please Note: If you try to replace the standard bearing with the 50 Cal Bearing on the standard trimmer you may have to buy shorter screws or grind down your exsiting screws to make it work.
  10. Electroless Nickel Plated Trimmer Base Replacement

    Replacement Trimmer Base. Electroless Nickel plated.
  11. Micrometer Adjustment Stop - Add On

    • Upgrade your standard Case Trimmer with a New Stainless long lasting finish with Micrometer adjustment
    • Bolts on to your Regular Wilson Case Trimmer
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • Made in the U.S.A. with American Steel
    $80.00
  12. Trimmer Base Screws

    Replacement parts.  10-32 Trimmer Base Screws. Holds Bearing and Stop Assembly onto Base.

Set Descending Direction

   

12 Item(s)