10% off all products for online orders (U.S.A. Orders Only). Price reflected in cart. (excluding presses)

For Accurate Uniform Handloads, Since 1927

0Item(s)
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Replacement Parts

Replacement Parts

Just Need a Part? Look No Further.
Set Descending Direction

   

Items 1 to 20 of 28 total

  1. 1
  2. 2
  1. 50 Cal TiN Coated Cutter

    NEW! 

    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
    $63.00
  2. Bullet Seater Set Screw and Pad

    Replacement set screw and pad for bullet seater.
  3. Hard Anodized Trimmer Base Replacement

    Replacement Trimmer Base Hard Anodized Aluminum With Chip Collecting Channel
  4. Stainless Trimmer Cutter Bearing

    Please Note: If you try to replace the standard bearing with the 50 Cal Bearing on the standard trimmer you may have to buy shorter screws or grind down your exsiting screws to make it work.
  5. Stainless Trimmer Stop Assembly

    Standard Stop Assembly Replacement. Includes Stop Screw, Stop Nut, Set Screw, Pad and Mounting Screw.
    Stop Screw is coated in black oxide coating for long durable finish

  6. Trimmer Base Rods

    Replacement rods for the trimmer base. These are the rails that the trimmer bearing and stop assembly rest on.
  7. Trimmer Base Screws

    Replacement parts.  10-32 Trimmer Base Screws. Holds Bearing and Stop Assembly onto Base.

  8. FLD Stainless Steel Lock Nut

    To set and lock in your depth for use with the Bushing Type Full Length Die.

    • L.E. Wilson manufactured lock nut - thickness is .225" from inside to outermost edge .270" for height and 1.250" total width OD.
    • 7/8 - 14 Thread
    • Includes set screw and Wilson's protective felt pad to go behind set.
  9. Replacement Punch for Full Length Sizing Die

    Replacement punch for Bushing Type Full Length Sizing Die.

    Just select your caliber and we will get you the correct replacment punch.

  10. Inside Neck Reamer / Primer Pocket Reamer Handle

    Replacement Hanlde for Inside Neck Reamer or Primer Pocket Reamer

    Includes Handle Only.

  11. Neck Die Replacement Cap

    Replacement Neck Die Cap
  12. Neck Die Screws and Pads for Rods

    Set Screws and Pads for Decap Rod. Includes 2 Screws and 2 Pads.
  13. Neck Die Screws for Top of Cap

    Replacement Screws for Top of Neck Die Cap. Includes 2 screws.
  14. Cap and VLD - Drift/Seating Stem Assembly

    Replacement Stainless Cap and VLD Stem Assembly
  15. Cap and Drift/Seating Stem Assmebly

    Replacement Cap and Standard Stem Assembly
  16. L.E. Wilson Case Trimmer Stand

    An alternative to mounting the trimmer in a vise. The Trimmer stand is available in the Regular and the 50 caliber verisons. Can be clamped or mounted to bench with screws. Anodized flat black for a long lasting finish. Sinclair "Shark Fin" compatable Comes with two screws to mount trimmer to stand. Bench mounting screws not provided.

    INSTRUCTIONS

  17. Micrometer Adjustment Stop - Add On

    • Upgrade your standard Case Trimmer with a New Stainless long lasting finish with Micrometer adjustment
    • Bolts on to your Regular Wilson Case Trimmer
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • Made in the U.S.A. with American Steel
    $80.00
  18. Regular TiN Coated Cutter

    • THESE TIN CUTTERS WILL TRIM 17 - 45 CAL
    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
    $48.00
  19. Replacement Case Trimmer Cutter

    The regular case trimmer cutter will now trim.17 to .45 caliber cases. The trimmer cutter is designed to trim cases to length and has been perfected over the last 70+ years to give you a flat square cut with little effort. Hardened to 60 Rockwell.

    Trimmer Cutter = Cases up to .490 (.17 - .45)

    Note: To be used with the Stainless Steel Case Trimmer and Stainless Micrometer Case Trimmer, Power Adaptor compatible

    50 Caliber = Cases .490 - .605 (.50)

    Note: To be used with the 50 Caliber Case Trimmer, Power Adaptor compatible

  20. Stainless Steel Revolving Crank Handle

    Upgrade your Case Trimmer Handle with the NEW Stainless Steel revolving crank. 

    • Extremely smooth action and improved ergonomics.
    • 304 Grade High Strength Stainless Steel
    • Revolving Stainless Steel Handle
    • Hole for Handle is Tapped in Crank for Easy Removal or Insertion, blind tapped on the cutter hole for a smooth outside finish (see picture)
    • Solid cavity free construction
    • Will work with standard cutter, 50 caliber cutter, NEW titanium nitride cutters, 30 and 45 degree Uniform De-burring tool, 50 cal Primer Pocket, 50 Cal Inside Neck Reamer

     

    $28.00
Set Descending Direction

   

Items 1 to 20 of 28 total

  1. 1
  2. 2