10% off all products for online orders (U.S.A. Orders Only). Price reflected in cart. (excluding presses)

For Accurate Uniform Handloads, Since 1927

0Item(s)
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Case Trimmers

Set Descending Direction

   

11 Item(s)

  1. Power Adaptor for Case Mouth Burring Tool

    • A quick and accurate way to de-burr the inside and outside of your case mouths
    • Designed with a tapered ID to allow a press fit, reducing wobble 
    • 1/4" hex drive to work with most power screwdrivers on the market
    • Reduces hand fatigue and allows you to get through this difficult step with ease
    • For use with the .17 - .45 Caliber Deburring Tool
    • Not compatible with the 50 Caliber Burring Tool
    • Depending on the age of your burring tool, since the adaptor is designed with a tapered fit, this adaptor may not be compatible.  If you have an issue, please contact us and we will help to resolve this issue.
    • Power Screwdriver and Burring tool NOT INCLUDED
    $30.00
  2. Micrometer Adjustment Stop - Add On

    • Upgrade your standard Case Trimmer with a New Stainless long lasting finish with Micrometer adjustment
    • Bolts on to your Regular Wilson Case Trimmer
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • Made in the U.S.A. with American Steel
    $80.00
  3. Replacement Case Trimmer Cutter

    The regular case trimmer cutter will now trim.17 to .45 caliber cases. The trimmer cutter is designed to trim cases to length and has been perfected over the last 70+ years to give you a flat square cut with little effort. Hardened to 60 Rockwell.

    Trimmer Cutter = Cases up to .490 (.17 - .45)

    Note: To be used with the Stainless Steel Case Trimmer and Stainless Micrometer Case Trimmer, Power Adaptor compatible

    50 Caliber = Cases .490 - .605 (.50)

    Note: To be used with the 50 Caliber Case Trimmer, Power Adaptor compatible

  4. Stainless Standard Case Trimmer

    Now in Stainless!!


    Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The case holders sit in a rail system that also holds the cutter housing insuring square and perfect alignment every time. Trimmers can be held in a vise or are compatible with the L.E. Wilson Case Trimmer Stand. Trimmers can also be used for inside neck reaming, military crimp removal, and case mouth deburring by adding additional cutters.

    Trims .17 to .45 Caliber Cases

    $106.00
  5. Stainless Case Trimmer with Micrometer Adjustment

    • Trims .17 to .45 Caliber Cases
    • New Stainless long lasting finish with Micrometer adjustment
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • NEW 304 Stainless Steel Handle included with Micrometer Trimmer
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable
    $160.00
  6. Stainless Case Trimmer Kit - with Micrometer Adjust Stop

    • Trims .17 - .45 caliber cases 
    • New Stainless long lasting finish with Micrometer adjustment
    • Coated with black oxide for a long lasting durable finish
    • NEW 304 Stainless Steel Handle included with Micrometer Trimmer
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable
    $206.00
  7. Regular Stop Stainless Case Trimmer Kit

    • Trims .17 - .45 Caliber Cases
    • New Stainless long lasting finish
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable
    $152.00
  8. 50 Caliber Stainless Micrometer Adjustment Case Trimmer

    NOW IN STAINLESS VERSION!

    Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The case holders sit in a rail system that also holds the cutter housing insuring square and perfect alignment every time. Trimmers can be held in a vise or are compatible with the L.E. Wilson Case Trimmer Stand. Trimmers can also be used for inside neck reaming, military crimp removal, and case mouth deburring by adding additional cutters.

    • Oversized cutter to handle 50 Caliber cases (.610)
    • Longer length to trim longer cases up to 3.925
    • Stop screw diameter is 1/2" - 20 thread for fine adjustment and frim stop
    • Stop screw is coated in a black oxide coating for a durable long lasting finish
    • Micrometer Stop Adjustment
    • Trimmer will accept accessories such as - 50 Cal Primer Pocket Reamer (to remove military crimp), 50 Cal Inside Neck Reamer (available in .507 and .512 diameter) and the NEW Titanium Nitride Cutter
    • Compatable with 50 Caliber mounting stands
    • The 50 Caliber Trimmer is also compatable with all other case holders and will trim down to 6mm

    INSTRUCTIONS

    $195.00
  9. 50 Caliber Stainless Case Trimmer

    NOW IN STAINLESS VERSION!

    Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The case holders sit in a rail system that also holds the cutter housing insuring square and perfect alignment every time. Trimmers can be held in a vise or are compatible with the L.E. Wilson Case Trimmer Stand. Trimmers can also be used for inside neck reaming, military crimp removal, and case mouth deburring by adding additional cutters.

    • Oversized cutter to handle 50 Caliber cases (.610)
    • Longer length to trim longer cases up to 3.925
    • Stop screw diameter is 1/2" - 20 thread for fine adjustment and frim stop
    • Stop screw is coated in a black oxide coating for a durable long lasting finishv
    • Trimmer will accept accessories such as - 50 Cal Primer Pocket Reamer (to remove military crimp), 50 Cal Inside Neck Reamer (available in .507 and .512 diameter) and the NEW Titanium Nitride Cutter
    • Compatable with 50 Caliber mounting stands
    • The 50 Caliber Trimmer is also compatable with all other case holders and will trim down to 6mm
    $137.00
  10. 50 Cal Stainless Case Trimmer Kit with Micro-Adjust Stop

    • New Stainless long lasting finish 
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw - 1/2 - 20 Thread with 5/8 Head on stop
    • Longer base to accomodate longer cases all standard case holders are compatable
    • Trimmer head will cut as 6mm to 50 cal
    • Micrometer Stop Adjustment
    • Made in the U.S.A. with American Steel


    NOTE: Kit variation shown in picture.  This is the 50 Caliber Kit with Micrometer Stop Adjustment.
    Kit includes:  Trimmer, 50 BMG Holder, Trimmer Stand with mounting screw, Case Holder Clamp and Micrometer Stop

    $245.00
  11. 50 Cal Stainless Case Trimmer Kit

    • New Stainless long lasting finish 
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw - 1/2 - 20 Thread with 5/8 Head on stop
    • Longer base to accomodate longer cases all standard case holders are compatable
    • Trimmer head will cut as 6mm to 50 cal
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable
    $187.00
Set Descending Direction

   

11 Item(s)