10% off all products for online orders (U.S.A. Orders Only). Price reflected in cart. (excluding presses)

For Accurate Uniform Handloads, Since 1927

0Item(s)
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Accessories

Set Descending Direction

   

11 Item(s)

  1. 50 Cal TiN Coated Cutter

    NEW! 

    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
    $63.00
  2. Inside Neck Reamer / Primer Pocket Reamer Handle

    Replacement Hanlde for Inside Neck Reamer or Primer Pocket Reamer

    Includes Handle Only.

  3. Trimmer Power Adapter

    Add power to your trimming with the power adapter. Designed to be used with a slow low powered hand drill.

    7/16-20 TPI - Will fit all of L.E. Wilson Brand Cutters. Including 50 Cal and TiN cutters.

    **NOTE - Operate between 100 - 200 RPM, higher speeds can cause cutter to seize in cutter bearing. **
    Keep cutter oiled when trimming

    $28.00
  4. Stainless Steel Revolving Crank Handle

    Upgrade your Case Trimmer Handle with the NEW Stainless Steel revolving crank. 

    • Extremely smooth action and improved ergonomics.
    • 304 Grade High Strength Stainless Steel
    • Revolving Stainless Steel Handle
    • Hole for Handle is Tapped in Crank for Easy Removal or Insertion, blind tapped on the cutter hole for a smooth outside finish (see picture)
    • Solid cavity free construction
    • Will work with standard cutter, 50 caliber cutter, NEW titanium nitride cutters, 30 and 45 degree Uniform De-burring tool, 50 cal Primer Pocket, 50 Cal Inside Neck Reamer

     

    $28.00
  5. Replacement Case Trimmer Cutter

    The regular case trimmer cutter will now trim.17 to .45 caliber cases. The trimmer cutter is designed to trim cases to length and has been perfected over the last 70+ years to give you a flat square cut with little effort. Hardened to 60 Rockwell.

    Trimmer Cutter = Cases up to .490 (.17 - .45)

    Note: To be used with the Stainless Steel Case Trimmer and Stainless Micrometer Case Trimmer, Power Adaptor compatible

    50 Caliber = Cases .490 - .605 (.50)

    Note: To be used with the 50 Caliber Case Trimmer, Power Adaptor compatible

  6. Regular TiN Coated Cutter

    • THESE TIN CUTTERS WILL TRIM 17 - 45 CAL
    • TiN (Titanium Nitride Coating) Has an ideal combination of hardness and wear resistance, it is the most frequently used ceramic coating on machine tools, and has the longest history
    • Holds sharp edges and corners
    • Harder than chrome and carbide off Rockwell C scale
    • Applied with a Physical Vapor Depostion (PVD) vacuum system
    • Can last 3 to 10 times longer than standard cutter
    • Made in USA by L.E. Wilson Inc
    This cutter will accept our stainless handle, jam nut and power adapter.
    $48.00
  7. Stainless Steel Case Holder Clamp

    Case Holder Clamp is and alternative to holding the case holder down with your hand. All you need to do is set the Case Holder on the rails of the trimmer and then swing the clamp over the top. There is an adjustment on top of the clamp to increase or decrease pressure. Cast from solid 304 Stainless Steel. Fine Polish. Not compatible with Q-Type Case Holders.
    $28.00
  8. L.E. Wilson Case Trimmer Stand

    An alternative to mounting the trimmer in a vise. The Trimmer stand is available in the Regular and the 50 caliber verisons. Can be clamped or mounted to bench with screws. Anodized flat black for a long lasting finish. Sinclair "Shark Fin" compatable Comes with two screws to mount trimmer to stand. Bench mounting screws not provided.

    INSTRUCTIONS

  9. Micrometer Adjustment Stop - Add On

    • Upgrade your standard Case Trimmer with a New Stainless long lasting finish with Micrometer adjustment
    • Bolts on to your Regular Wilson Case Trimmer
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • Made in the U.S.A. with American Steel
    $80.00
  10. Power Adaptor for Case Mouth Burring Tool

    • A quick and accurate way to de-burr the inside and outside of your case mouths
    • Designed with a tapered ID to allow a press fit, reducing wobble 
    • 1/4" hex drive to work with most power screwdrivers on the market
    • Reduces hand fatigue and allows you to get through this difficult step with ease
    • For use with the .17 - .45 Caliber Deburring Tool
    • Not compatible with the 50 Caliber Burring Tool
    • Depending on the age of your burring tool, since the adaptor is designed with a tapered fit, this adaptor may not be compatible.  If you have an issue, please contact us and we will help to resolve this issue.
    • Power Screwdriver and Burring tool NOT INCLUDED
    $30.00
  11. Wilson Case Trimmer Kit Box Only

    A great way to store your Wilson Case Trimmer when traveling or not in use.  This box will fit either the Standard Stop Case Trimmer or the Micrometer Stop Trimmer.  Will NOT work for 50 Caliber models.

    PLASTIC STORAGE CASE ONLY - Made In USA

    $16.00
Set Descending Direction

   

11 Item(s)