10% off all products for online orders. Price reflected in cart. (excluding presses)

For Accurate Uniform Handloads, Since 1927

0Item(s)
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Case Prep Tools

Case Prep Tools

Accurate Shots are Born from Proper Case Preparation.
Set Descending Direction

   

Items 1 to 20 of 29 total

  1. 1
  2. 2
  1. Pistol Holders

    These hardened holders (for fired cases only) are stocked in .38 Special, .38 Super Auto, .357 Magnum, .44 Russian, .44 Special, .44 Magnum, 40 S&W, .45 Auto, .45 Colt and 10mm. All these cases have practically no body taper and require a special type holder, which is constructed very much like a neck sizing die.

    Cases can’t be “bumped” in and out of these holders like most rifle cases but must be forced in with a light arbor press or mallet and must be driven or pushed out.

    These holders are made longer than the cases to be trimmed so that cases may be forced clear in without damage to case mouth. Holders are counterbored at mouth end for cutter clearance. Users will find the case trimmer somewhat slower on pistol cases than on rifle cases but it will produce a very uniform case length with consequent perfection in crimping.

    INSTRUCTIONS

  2. Q-Type Case Holder

    Case Holders allow you to trim cases in your Wilson Case Trimmer. The Q-Type case holders hold the case with an easy to use cross pin. Use this type whenever possible because the regular pistol case holders require you to tap the pistol case in, which is more difficult than the rifle cases because of the lack of a body taper.

    Not compatible with the Sinclair "Sharkfin" or the L.E. Wilson Case Holder Clamp

    INSTRUCTIONS

  3. Rifle Case Holders

    The case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with our Uniform Deburring Tool. The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability.

    * The FIRED Case Holders are for Neck Sized Cases. * But, if we DO NOT make a "New Case" holder for your caliber then this will work for all cases (NEW, FIRED OR FULL LENGTH RESIZED).

    ** For example: we only make ONE holder for the 222/223 Remington. This will work for all Fired / New and Full Length Resized Brass **

    INSTRUCTIONS

  4. Rifle Case Holders - NEW CASE

    The case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with our Uniform Deburring Tool. The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability.

    ** If we make a NEW Case Holder, it is for full length resized or new brass. **

    ***If we do not stock a NEW Case Holder then all you will need is the Standard Fired version. ***

    INSTRUCTIONS

  5. 17 Caliber Regular Stop Stainless Case Trimmer Kit

    • With 17 Caliber Cutter
    • New Stainless long lasting finish
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable

    INSTRUCTIONS

    $154.00
  6. Stainless Case Trimmer Kit - with Micrometer Adjust Stop

    • New Stainless long lasting finish with Micrometer adjustment
    • Coated with black oxide for a long lasting durable finish
    • NEW 304 Stainless Steel Handle included with Micrometer Trimmer
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable

    INSTRUCTIONS

    $206.00
  7. Regular Stop Stainless Case Trimmer Kit

    • New Stainless long lasting finish
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable

    INSTRUCTIONS

    $152.00
  8. Stainless Standard Case Trimmer

    Now in Stainless!!

    Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The case holders sit in a rail system that also holds the cutter housing insuring square and perfect alignment every time. Trimmers can be held in a vise or are compatible with the L.E. Wilson Case Trimmer Stand. Trimmers can also be used for inside neck reaming, military crimp removal, and case mouth deburring by adding additional cutters.

    INSTRUCTIONS

  9. Stainless Case Trimmer with Micrometer Adjustment

    • New Stainless long lasting finish with Micrometer adjustment
    • Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
    • NEW 304 Stainless Steel Handle included with Micrometer Trimmer
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable

    INSTRUCTIONS

  10. 50 Cal Stainless Case Trimmer Kit

    • New Stainless long lasting finish 
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw - 1/2 - 20 Thread with 5/8 Head on stop
    • Longer base to accomodate longer cases all standard case holders are compatable
    • Trimmer head will cut as 6mm to 50 cal
    • Made in the U.S.A. with American Steel
    • Power Adaptor compatable

    INSTRUCTIONS

    $187.00
  11. 50 Cal Stainless Case Trimmer Kit with Micro-Adjust Stop

    • New Stainless long lasting finish 
    • Coated with black oxide for a long lasting durable finish.
    • Major adjustment in the Stop Screw - 1/2 - 20 Thread with 5/8 Head on stop
    • Longer base to accomodate longer cases all standard case holders are compatable
    • Trimmer head will cut as 6mm to 50 cal
    • Micrometer Stop Adjustment
    • Made in the U.S.A. with American Steel


    NOTE: Kit variation shown in picture.  This is the 50 Caliber Kit with Micrometer Stop Adjustment.
    Kit includes:  Trimmer, 50 BMG Holder, Trimmer Stand with mounting screw, Case Holder Clamp and Micrometer Stop

    INSTRUCTIONS

    $245.00
  12. Trimmer Power Adapter

    Add power to your trimming with the power adapter. Designed to be used with a slow low powered hand drill.

    7/16-20 TPI - Will fit all of L.E. Wilson Brand Cutters. Including 50 Cal and TiN cutters.

    **NOTE - Operate between 100 - 200 RPM, higher speeds can cause cutter to seize in cutter bearing. **
    Keep cutter oiled when trimming

    $28.00
  13. 50 Caliber Burring Tool

    All cases should be case mouth deburred after trimming and neck turning. Tools are double-ended with standard 45-degree flutes that debur/chamfer the inside and outside mouth of the case. Female end is hand filed and each tool is inspected 3 different times through the manufacturing process. 50 Caliber with a protective sleeve.
    $30.00
  14. 50 Caliber Inside Neck Reamer

    Thick necks can cause high chamber pressures and erratic shooting. Neck reamers remove excess neck material to insure adequate clearance exists between the case neck and the chamber. Also, these reamers can be used when forming wildcats from a parent case. The 50 Cal Neck Reamer is used in the 50 Caliber Trimmer in place of the trimmer cutter. Standard reamers are sized for use on fired, unsized cases. Special sizes can be ground but will extend lead time, please call for pricing and availability.
    $64.00
  15. 50 Caliber Primer Pocket Reamer

    Used in conjunction with the 50 Caliber Case Trimmer to remove the primer pocket crimp on military cases. The finished result is a nice rounded entry for primers. Unlike some tools this tool will not distort the case head. Crank-style handle included.
    $60.00
  16. Case Mouth Burring Tool

    All cases should be case mouth deburred after trimming and neck turning. Tools are double-ended with standard 45-degree flutes that debur/chamfer the inside and outside mouth of the case. They will work on cases from .17 to .45 and .50 caliber. Female end is hand filed and each tool is inspected 3 different times through the manufacturing process.
    $26.00
  17. Inside Neck Reamer

    Thick necks can cause high chamber pressures and erratic shooting. Neck reamers remove excess neck material to ensure adequate clearance exists between the case neck and the chamber.
     
    Also, these reamers can be used when forming wildcats from a parent case. Reamers are used in the trimmers in place of the trimmer cutter. Standard reamers are sized for use on fired, unsized cases. Special sizes can be ground but will extend lead time, please call for pricing and availability.

    Knob-style handle included. 
  18. Uniform Burring Tool 30 or 45 degree

    We produce two case mouth deburring tools for use in the Case Trimmer. The deburring tools mount in the cutter housing and each includes a crank style handle. Cases are inserted into the trimmer case holders and are held square to the deburring tool. Available in both standard 45 degree and 30 degree chamfer.
    ** COMES WITH CRANK-STYLE HANDLE**

  19. Primer Pocket Reamer

    Used in conjunction with the Case Trimmer to remove the primer pocket crimp on military cases. The finished result is a nice rounded entry for primers.

    Unlike some tools this tool will not distort the case head. Specify large (.210) or small (.175) when ordering. Comes with a knob style handle.

  20. Stainless Steel Revolving Crank Handle

    Upgrade your Case Trimmer Handle with the NEW Stainless Steel revolving crank. 

    • Extremely smooth action and improved ergonomics.
    • 304 Grade High Strength Stainless Steel
    • Revolving Stainless Steel Handle
    • Hole for Handle is Tapped in Crank for Easy Removal or Insertion, blind tapped on the cutter hole for a smooth outside finish (see picture)
    • Solid cavity free construction
    • Will work with standard cutter, 50 caliber cutter, NEW titanium nitride cutters, 30 and 45 degree Uniform De-burring tool, 50 cal Primer Pocket, 50 Cal Inside Neck Reamer

     

    $28.00
Set Descending Direction

   

Items 1 to 20 of 29 total

  1. 1
  2. 2